Imports System
Imports System.Data
Imports System.Data.SqlTypes
Imports System.Data.SqlClient
Imports System.ComponentModel


Public Class frmKostenstelle
    Inherits EDOKA.frmRelEditor

#Region " Vom Windows Form Designer generierter Code "

    Public Sub New()
        MyBase.New()

        ' Dieser Aufruf ist für den Windows Form-Designer erforderlich.
        InitializeComponent()

        ' Initialisierungen nach dem Aufruf InitializeComponent() hinzufügen

    End Sub

    ' Die Form überschreibt den Löschvorgang der Basisklasse, um Komponenten zu bereinigen.
    Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
        If disposing Then
            If Not (components Is Nothing) Then
                components.Dispose()
            End If
        End If
        MyBase.Dispose(disposing)
    End Sub

    ' Für Windows Form-Designer erforderlich
    Private components As System.ComponentModel.IContainer

    'HINWEIS: Die folgende Prozedur ist für den Windows Form-Designer erforderlich
    'Sie kann mit dem Windows Form-Designer modifiziert werden.
    'Verwenden Sie nicht den Code-Editor zur Bearbeitung.
    Friend WithEvents SqlDataAdapter1 As System.Data.SqlClient.SqlDataAdapter
    Friend WithEvents SqlSelectCommand1 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlInsertCommand1 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlUpdateCommand1 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlDeleteCommand1 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
    Friend WithEvents SqlDataAdapter2 As System.Data.SqlClient.SqlDataAdapter
    Friend WithEvents SqlSelectCommand2 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlInsertCommand2 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlUpdateCommand2 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlDeleteCommand2 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlDataAdapter3 As System.Data.SqlClient.SqlDataAdapter
    Friend WithEvents DataSet1 As System.Data.DataSet
    Friend WithEvents DataSet2 As System.Data.DataSet
    Friend WithEvents DataSet3 As System.Data.DataSet
    Friend WithEvents SqlDataAdapter4 As System.Data.SqlClient.SqlDataAdapter
    Friend WithEvents SqlSelectCommand4 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlInsertCommand4 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlUpdateCommand4 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlDeleteCommand4 As System.Data.SqlClient.SqlCommand
    Friend WithEvents DataSet4 As System.Data.DataSet
    Friend WithEvents C1TrueDBDropdown1 As C1.Win.C1TrueDBGrid.C1TrueDBDropdown
    Friend WithEvents SqlConnection2 As System.Data.SqlClient.SqlConnection
    Friend WithEvents SqlConnection3 As System.Data.SqlClient.SqlConnection
    Friend WithEvents SqlSelectCommand3 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlInsertCommand3 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlUpdateCommand3 As System.Data.SqlClient.SqlCommand
    Friend WithEvents SqlDeleteCommand3 As System.Data.SqlClient.SqlCommand
    <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
        Dim resources As System.Resources.ResourceManager = New System.Resources.ResourceManager(GetType(frmKostenstelle))
        Dim GridLines1 As C1.Win.C1TrueDBGrid.Util.GridLines = New C1.Win.C1TrueDBGrid.Util.GridLines()
        Me.SqlDataAdapter1 = New System.Data.SqlClient.SqlDataAdapter()
        Me.SqlDeleteCommand1 = New System.Data.SqlClient.SqlCommand()
        Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection()
        Me.SqlInsertCommand1 = New System.Data.SqlClient.SqlCommand()
        Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand()
        Me.SqlUpdateCommand1 = New System.Data.SqlClient.SqlCommand()
        Me.SqlDataAdapter2 = New System.Data.SqlClient.SqlDataAdapter()
        Me.SqlDeleteCommand2 = New System.Data.SqlClient.SqlCommand()
        Me.SqlInsertCommand2 = New System.Data.SqlClient.SqlCommand()
        Me.SqlSelectCommand2 = New System.Data.SqlClient.SqlCommand()
        Me.SqlUpdateCommand2 = New System.Data.SqlClient.SqlCommand()
        Me.SqlDataAdapter3 = New System.Data.SqlClient.SqlDataAdapter()
        Me.SqlConnection3 = New System.Data.SqlClient.SqlConnection()
        Me.DataSet1 = New System.Data.DataSet()
        Me.DataSet2 = New System.Data.DataSet()
        Me.DataSet3 = New System.Data.DataSet()
        Me.SqlDataAdapter4 = New System.Data.SqlClient.SqlDataAdapter()
        Me.SqlDeleteCommand4 = New System.Data.SqlClient.SqlCommand()
        Me.SqlInsertCommand4 = New System.Data.SqlClient.SqlCommand()
        Me.SqlSelectCommand4 = New System.Data.SqlClient.SqlCommand()
        Me.SqlUpdateCommand4 = New System.Data.SqlClient.SqlCommand()
        Me.DataSet4 = New System.Data.DataSet()
        Me.C1TrueDBDropdown1 = New C1.Win.C1TrueDBGrid.C1TrueDBDropdown()
        Me.SqlConnection2 = New System.Data.SqlClient.SqlConnection()
        Me.SqlSelectCommand3 = New System.Data.SqlClient.SqlCommand()
        Me.SqlInsertCommand3 = New System.Data.SqlClient.SqlCommand()
        Me.SqlUpdateCommand3 = New System.Data.SqlClient.SqlCommand()
        Me.SqlDeleteCommand3 = New System.Data.SqlClient.SqlCommand()
        CType(Me.DataSet1, System.ComponentModel.ISupportInitialize).BeginInit()
        CType(Me.DataSet2, System.ComponentModel.ISupportInitialize).BeginInit()
        CType(Me.DataSet3, System.ComponentModel.ISupportInitialize).BeginInit()
        CType(Me.DataSet4, System.ComponentModel.ISupportInitialize).BeginInit()
        CType(Me.C1TrueDBDropdown1, System.ComponentModel.ISupportInitialize).BeginInit()
        Me.SuspendLayout()
        '
        'SqlDataAdapter1
        '
        Me.SqlDataAdapter1.DeleteCommand = Me.SqlDeleteCommand1
        Me.SqlDataAdapter1.InsertCommand = Me.SqlInsertCommand1
        Me.SqlDataAdapter1.SelectCommand = Me.SqlSelectCommand1
        Me.SqlDataAdapter1.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "marktbereich", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("marktbereichnr", "marktbereichnr"), New System.Data.Common.DataColumnMapping("bezeichnung", "bezeichnung"), New System.Data.Common.DataColumnMapping("beschreibung", "beschreibung"), New System.Data.Common.DataColumnMapping("mandantnr", "mandantnr"), New System.Data.Common.DataColumnMapping("aktiv", "aktiv"), New System.Data.Common.DataColumnMapping("erstellt_am", "erstellt_am"), New System.Data.Common.DataColumnMapping("mutiert_am", "mutiert_am"), New System.Data.Common.DataColumnMapping("mutierer", "mutierer")})})
        Me.SqlDataAdapter1.UpdateCommand = Me.SqlUpdateCommand1
        '
        'SqlDeleteCommand1
        '
        Me.SqlDeleteCommand1.CommandText = "[pv_marktbereich_delete]"
        Me.SqlDeleteCommand1.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlDeleteCommand1.Connection = Me.SqlConnection1
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_marktbereichnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "marktbereichnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_beschreibung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "beschreibung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bezeichnung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bezeichnung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        '
        'SqlConnection1
        '
        Me.SqlConnection1.ConnectionString = "data source=shu;initial catalog=edoka;persist security info=False;user id=sa;work" & _
        "station id=SHU;packet size=4096"
        '
        'SqlInsertCommand1
        '
        Me.SqlInsertCommand1.CommandText = "[pv_marktbereich_insert]"
        Me.SqlInsertCommand1.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlInsertCommand1.Connection = Me.SqlConnection1
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@marktbereichnr", System.Data.SqlDbType.Int, 4, "marktbereichnr"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bezeichnung", System.Data.SqlDbType.VarChar, 255, "bezeichnung"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@beschreibung", System.Data.SqlDbType.VarChar, 255, "beschreibung"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlInsertCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        '
        'SqlSelectCommand1
        '
        Me.SqlSelectCommand1.CommandText = "[pv_marktbereich_select]"
        Me.SqlSelectCommand1.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlSelectCommand1.Connection = Me.SqlConnection1
        Me.SqlSelectCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        '
        'SqlUpdateCommand1
        '
        Me.SqlUpdateCommand1.CommandText = "[pv_marktbereich_update]"
        Me.SqlUpdateCommand1.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlUpdateCommand1.Connection = Me.SqlConnection1
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@marktbereichnr", System.Data.SqlDbType.Int, 4, "marktbereichnr"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bezeichnung", System.Data.SqlDbType.VarChar, 255, "bezeichnung"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@beschreibung", System.Data.SqlDbType.VarChar, 255, "beschreibung"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_marktbereichnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "marktbereichnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_beschreibung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "beschreibung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bezeichnung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bezeichnung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand1.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        '
        'SqlDataAdapter2
        '
        Me.SqlDataAdapter2.DeleteCommand = Me.SqlDeleteCommand2
        Me.SqlDataAdapter2.InsertCommand = Me.SqlInsertCommand2
        Me.SqlDataAdapter2.SelectCommand = Me.SqlSelectCommand2
        Me.SqlDataAdapter2.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "niederlassung", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("niederlassungnr", "niederlassungnr"), New System.Data.Common.DataColumnMapping("bezeichnung", "bezeichnung"), New System.Data.Common.DataColumnMapping("beschreibung", "beschreibung"), New System.Data.Common.DataColumnMapping("nlnummer", "nlnummer"), New System.Data.Common.DataColumnMapping("nltyp", "nltyp"), New System.Data.Common.DataColumnMapping("edoka_dokumenterstellung", "edoka_dokumenterstellung"), New System.Data.Common.DataColumnMapping("mandantnr", "mandantnr"), New System.Data.Common.DataColumnMapping("aktiv", "aktiv"), New System.Data.Common.DataColumnMapping("erstellt_am", "erstellt_am"), New System.Data.Common.DataColumnMapping("mutiert_am", "mutiert_am"), New System.Data.Common.DataColumnMapping("mutierer", "mutierer")})})
        Me.SqlDataAdapter2.UpdateCommand = Me.SqlUpdateCommand2
        '
        'SqlDeleteCommand2
        '
        Me.SqlDeleteCommand2.CommandText = "[pv_niederlassung_delete]"
        Me.SqlDeleteCommand2.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlDeleteCommand2.Connection = Me.SqlConnection1
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_niederlassungnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "niederlassungnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_beschreibung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "beschreibung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bezeichnung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bezeichnung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_edoka_dokumenterstellung", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "edoka_dokumenterstellung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_nlnummer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "nlnummer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_nltyp", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "nltyp", System.Data.DataRowVersion.Original, Nothing))
        '
        'SqlInsertCommand2
        '
        Me.SqlInsertCommand2.CommandText = "[pv_niederlassung_insert]"
        Me.SqlInsertCommand2.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlInsertCommand2.Connection = Me.SqlConnection1
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@niederlassungnr", System.Data.SqlDbType.Int, 4, "niederlassungnr"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bezeichnung", System.Data.SqlDbType.VarChar, 255, "bezeichnung"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@beschreibung", System.Data.SqlDbType.VarChar, 255, "beschreibung"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@nlnummer", System.Data.SqlDbType.Int, 4, "nlnummer"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@nltyp", System.Data.SqlDbType.VarChar, 255, "nltyp"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@edoka_dokumenterstellung", System.Data.SqlDbType.Bit, 1, "edoka_dokumenterstellung"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlInsertCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        '
        'SqlSelectCommand2
        '
        Me.SqlSelectCommand2.CommandText = "[pv_niederlassung_select]"
        Me.SqlSelectCommand2.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlSelectCommand2.Connection = Me.SqlConnection1
        Me.SqlSelectCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        '
        'SqlUpdateCommand2
        '
        Me.SqlUpdateCommand2.CommandText = "[pv_niederlassung_update]"
        Me.SqlUpdateCommand2.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlUpdateCommand2.Connection = Me.SqlConnection1
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@niederlassungnr", System.Data.SqlDbType.Int, 4, "niederlassungnr"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bezeichnung", System.Data.SqlDbType.VarChar, 255, "bezeichnung"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@beschreibung", System.Data.SqlDbType.VarChar, 255, "beschreibung"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@nlnummer", System.Data.SqlDbType.Int, 4, "nlnummer"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@nltyp", System.Data.SqlDbType.VarChar, 255, "nltyp"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@edoka_dokumenterstellung", System.Data.SqlDbType.Bit, 1, "edoka_dokumenterstellung"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_niederlassungnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "niederlassungnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_beschreibung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "beschreibung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bezeichnung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bezeichnung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_edoka_dokumenterstellung", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "edoka_dokumenterstellung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_nlnummer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "nlnummer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand2.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_nltyp", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "nltyp", System.Data.DataRowVersion.Original, Nothing))
        '
        'SqlDataAdapter3
        '
        Me.SqlDataAdapter3.DeleteCommand = Me.SqlDeleteCommand3
        Me.SqlDataAdapter3.InsertCommand = Me.SqlInsertCommand3
        Me.SqlDataAdapter3.SelectCommand = Me.SqlSelectCommand3
        Me.SqlDataAdapter3.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "kostenstelle", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("kostenstellenr", "kostenstellenr"), New System.Data.Common.DataColumnMapping("bezeichnung", "bezeichnung"), New System.Data.Common.DataColumnMapping("beschreibung", "beschreibung"), New System.Data.Common.DataColumnMapping("kostenstellenummer", "kostenstellenummer"), New System.Data.Common.DataColumnMapping("dokument_kopfzeile", "dokument_kopfzeile"), New System.Data.Common.DataColumnMapping("marktbereichnr", "marktbereichnr"), New System.Data.Common.DataColumnMapping("niederlassungnr", "niederlassungnr"), New System.Data.Common.DataColumnMapping("bankinformationnr", "bankinformationnr"), New System.Data.Common.DataColumnMapping("mandantnr", "mandantnr"), New System.Data.Common.DataColumnMapping("erstellt_am", "erstellt_am"), New System.Data.Common.DataColumnMapping("mutiert_am", "mutiert_am"), New System.Data.Common.DataColumnMapping("mutierer", "mutierer"), New System.Data.Common.DataColumnMapping("aktiv", "aktiv")})})
        Me.SqlDataAdapter3.UpdateCommand = Me.SqlUpdateCommand3
        '
        'SqlConnection3
        '
        Me.SqlConnection3.ConnectionString = "data source=shu;initial catalog=edoka_tkb;integrated security=SSPI;persist securi" & _
        "ty info=False;workstation id=SHU;packet size=4096"
        '
        'DataSet1
        '
        Me.DataSet1.DataSetName = "NewDataSet"
        Me.DataSet1.Locale = New System.Globalization.CultureInfo("de-CH")
        '
        'DataSet2
        '
        Me.DataSet2.DataSetName = "NewDataSet"
        Me.DataSet2.Locale = New System.Globalization.CultureInfo("de-CH")
        '
        'DataSet3
        '
        Me.DataSet3.DataSetName = "NewDataSet"
        Me.DataSet3.Locale = New System.Globalization.CultureInfo("de-CH")
        '
        'SqlDataAdapter4
        '
        Me.SqlDataAdapter4.DeleteCommand = Me.SqlDeleteCommand4
        Me.SqlDataAdapter4.InsertCommand = Me.SqlInsertCommand4
        Me.SqlDataAdapter4.SelectCommand = Me.SqlSelectCommand4
        Me.SqlDataAdapter4.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "bankinformation", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("bankinformationnr", "bankinformationnr"), New System.Data.Common.DataColumnMapping("bankname", "bankname"), New System.Data.Common.DataColumnMapping("adresszeile1", "adresszeile1"), New System.Data.Common.DataColumnMapping("adresszeile2", "adresszeile2"), New System.Data.Common.DataColumnMapping("plz", "plz"), New System.Data.Common.DataColumnMapping("ort", "ort"), New System.Data.Common.DataColumnMapping("telefon", "telefon"), New System.Data.Common.DataColumnMapping("telefax", "telefax"), New System.Data.Common.DataColumnMapping("email", "email"), New System.Data.Common.DataColumnMapping("internet", "internet"), New System.Data.Common.DataColumnMapping("mandantnr", "mandantnr"), New System.Data.Common.DataColumnMapping("aktiv", "aktiv"), New System.Data.Common.DataColumnMapping("erstellt_am", "erstellt_am"), New System.Data.Common.DataColumnMapping("mutiert_am", "mutiert_am"), New System.Data.Common.DataColumnMapping("mutierer", "mutierer")})})
        Me.SqlDataAdapter4.UpdateCommand = Me.SqlUpdateCommand4
        '
        'SqlDeleteCommand4
        '
        Me.SqlDeleteCommand4.CommandText = "[pv_bankinformatione_delete]"
        Me.SqlDeleteCommand4.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlDeleteCommand4.Connection = Me.SqlConnection1
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bankinformationnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bankinformationnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_adresszeile1", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "adresszeile1", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_adresszeile2", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "adresszeile2", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bankname", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bankname", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_email", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "email", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_internet", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "internet", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_ort", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "ort", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_plz", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "plz", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_telefax", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "telefax", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_telefon", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "telefon", System.Data.DataRowVersion.Original, Nothing))
        '
        'SqlInsertCommand4
        '
        Me.SqlInsertCommand4.CommandText = "[pv_bankinformation_insert]"
        Me.SqlInsertCommand4.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlInsertCommand4.Connection = Me.SqlConnection1
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bankinformationnr", System.Data.SqlDbType.Int, 4, "bankinformationnr"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bankname", System.Data.SqlDbType.VarChar, 255, "bankname"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@adresszeile1", System.Data.SqlDbType.VarChar, 255, "adresszeile1"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@adresszeile2", System.Data.SqlDbType.VarChar, 255, "adresszeile2"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@plz", System.Data.SqlDbType.VarChar, 255, "plz"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@ort", System.Data.SqlDbType.VarChar, 255, "ort"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@telefon", System.Data.SqlDbType.VarChar, 255, "telefon"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@telefax", System.Data.SqlDbType.VarChar, 255, "telefax"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@email", System.Data.SqlDbType.VarChar, 255, "email"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@internet", System.Data.SqlDbType.VarChar, 255, "internet"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlInsertCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        '
        'SqlSelectCommand4
        '
        Me.SqlSelectCommand4.CommandText = "[pv_bankinformation_select]"
        Me.SqlSelectCommand4.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlSelectCommand4.Connection = Me.SqlConnection1
        Me.SqlSelectCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        '
        'SqlUpdateCommand4
        '
        Me.SqlUpdateCommand4.CommandText = "[pv_bankinformation_update]"
        Me.SqlUpdateCommand4.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlUpdateCommand4.Connection = Me.SqlConnection1
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bankinformationnr", System.Data.SqlDbType.Int, 4, "bankinformationnr"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bankname", System.Data.SqlDbType.VarChar, 255, "bankname"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@adresszeile1", System.Data.SqlDbType.VarChar, 255, "adresszeile1"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@adresszeile2", System.Data.SqlDbType.VarChar, 255, "adresszeile2"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@plz", System.Data.SqlDbType.VarChar, 255, "plz"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@ort", System.Data.SqlDbType.VarChar, 255, "ort"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@telefon", System.Data.SqlDbType.VarChar, 255, "telefon"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@telefax", System.Data.SqlDbType.VarChar, 255, "telefax"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@email", System.Data.SqlDbType.VarChar, 255, "email"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@internet", System.Data.SqlDbType.VarChar, 255, "internet"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bankinformationnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bankinformationnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_adresszeile1", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "adresszeile1", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_adresszeile2", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "adresszeile2", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bankname", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bankname", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_email", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "email", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_internet", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "internet", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_ort", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "ort", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_plz", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "plz", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_telefax", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "telefax", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand4.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_telefon", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "telefon", System.Data.DataRowVersion.Original, Nothing))
        '
        'DataSet4
        '
        Me.DataSet4.DataSetName = "NewDataSet"
        Me.DataSet4.Locale = New System.Globalization.CultureInfo("de-CH")
        '
        'C1TrueDBDropdown1
        '
        Me.C1TrueDBDropdown1.AllowColMove = True
        Me.C1TrueDBDropdown1.AllowColSelect = True
        Me.C1TrueDBDropdown1.AllowFilter = True
        Me.C1TrueDBDropdown1.AllowRowSizing = C1.Win.C1TrueDBGrid.RowSizingEnum.AllRows
        Me.C1TrueDBDropdown1.AllowSort = True
        Me.C1TrueDBDropdown1.AlternatingRows = False
        Me.C1TrueDBDropdown1.CaptionHeight = 17
        Me.C1TrueDBDropdown1.ColumnCaptionHeight = 17
        Me.C1TrueDBDropdown1.ColumnFooterHeight = 17
        Me.C1TrueDBDropdown1.ColumnHeaders = False
        Me.C1TrueDBDropdown1.DeadAreaBackColor = System.Drawing.Color.Empty
        Me.C1TrueDBDropdown1.FetchRowStyles = False
        Me.C1TrueDBDropdown1.Images.Add(CType(resources.GetObject("resource.Images"), System.Drawing.Bitmap))
        Me.C1TrueDBDropdown1.LayoutFileName = ""
        Me.C1TrueDBDropdown1.LayoutName = ""
        Me.C1TrueDBDropdown1.LayoutURL = ""
        Me.C1TrueDBDropdown1.Location = New System.Drawing.Point(104, 0)
        Me.C1TrueDBDropdown1.Name = "C1TrueDBDropdown1"
        GridLines1.Color = System.Drawing.Color.DarkGray
        GridLines1.Style = C1.Win.C1TrueDBGrid.LineStyleEnum.Single
        Me.C1TrueDBDropdown1.RowDivider = GridLines1
        Me.C1TrueDBDropdown1.RowHeight = 15
        Me.C1TrueDBDropdown1.RowSubDividerColor = System.Drawing.Color.DarkGray
        Me.C1TrueDBDropdown1.ScrollTips = False
        Me.C1TrueDBDropdown1.Size = New System.Drawing.Size(392, 264)
        Me.C1TrueDBDropdown1.TabIndex = 19
        Me.C1TrueDBDropdown1.Text = "C1TrueDBDropdown1"
        Me.C1TrueDBDropdown1.Visible = False
        Me.C1TrueDBDropdown1.PropBag = "<?xml version=""1.0""?><Blob><Styles type=""C1.Win.C1TrueDBGrid.Design.ContextWrappe" & _
        "r""><Data>Group{AlignVert:Center;Border:None,,0, 0, 0, 0;BackColor:ControlDark;}E" & _
        "ditor{}Style2{}Style5{}Style4{}Style7{}Style6{}EvenRow{BackColor:Aqua;}Selected{" & _
        "ForeColor:HighlightText;BackColor:Highlight;}Style3{}Inactive{ForeColor:Inactive" & _
        "CaptionText;BackColor:InactiveCaption;}FilterBar{}Footer{}Caption{AlignHorz:Cent" & _
        "er;}Normal{}HighlightRow{ForeColor:HighlightText;BackColor:Highlight;}Style1{}Od" & _
        "dRow{}RecordSelector{AlignImage:Center;}Heading{Wrap:True;BackColor:Control;Bord" & _
        "er:Raised,,1, 1, 1, 1;ForeColor:ControlText;AlignVert:Center;}Style8{}Style10{Al" & _
        "ignHorz:Near;}Style11{}Style12{}Style13{}Style9{}</Data></Styles><Splits><C1.Win" & _
        ".C1TrueDBGrid.DropdownView Name="""" CaptionHeight=""17"" ColumnCaptionHeight=""17"" C" & _
        "olumnFooterHeight=""17"" MarqueeStyle=""DottedCellBorder"" RecordSelectorWidth=""16"" " & _
        "RecordSelectors=""False"" VerticalScrollGroup=""1"" HorizontalScrollGroup=""1""><Clien" & _
        "tRect>0, 0, 388, 260</ClientRect><CaptionStyle parent=""Style2"" me=""Style10"" /><E" & _
        "ditorStyle parent=""Editor"" me=""Style5"" /><EvenRowStyle parent=""EvenRow"" me=""Styl" & _
        "e8"" /><FilterBarStyle parent=""FilterBar"" me=""Style13"" /><FooterStyle parent=""Foo" & _
        "ter"" me=""Style3"" /><GroupStyle parent=""Group"" me=""Style12"" /><HeadingStyle paren" & _
        "t=""Heading"" me=""Style2"" /><HighLightRowStyle parent=""HighlightRow"" me=""Style7"" /" & _
        "><InactiveStyle parent=""Inactive"" me=""Style4"" /><OddRowStyle parent=""OddRow"" me=" & _
        """Style9"" /><RecordSelectorStyle parent=""RecordSelector"" me=""Style11"" /><Selected" & _
        "Style parent=""Selected"" me=""Style6"" /><Style parent=""Normal"" me=""Style1"" /></C1." & _
        "Win.C1TrueDBGrid.DropdownView></Splits><NamedStyles><Style parent="""" me=""Normal""" & _
        " /><Style parent=""Normal"" me=""Heading"" /><Style parent=""Heading"" me=""Footer"" /><" & _
        "Style parent=""Heading"" me=""Caption"" /><Style parent=""Heading"" me=""Inactive"" /><S" & _
        "tyle parent=""Normal"" me=""Selected"" /><Style parent=""Normal"" me=""Editor"" /><Style" & _
        " parent=""Normal"" me=""HighlightRow"" /><Style parent=""Normal"" me=""EvenRow"" /><Styl" & _
        "e parent=""Normal"" me=""OddRow"" /><Style parent=""Heading"" me=""RecordSelector"" /><S" & _
        "tyle parent=""Normal"" me=""FilterBar"" /><Style parent=""Caption"" me=""Group"" /></Nam" & _
        "edStyles><vertSplits>1</vertSplits><horzSplits>1</horzSplits><Layout>None</Layou" & _
        "t><DefaultRecSelWidth>16</DefaultRecSelWidth><ClientArea>0, 0, 388, 260</ClientA" & _
        "rea></Blob>"
        '
        'SqlConnection2
        '
        Me.SqlConnection2.ConnectionString = "data source=shu;initial catalog=edoka_tkb;password="""";persist security info=True;" & _
        "user id=sa;workstation id=SHU;packet size=4096"
        '
        'SqlSelectCommand3
        '
        Me.SqlSelectCommand3.CommandText = "[sp_kostenstelle_select]"
        Me.SqlSelectCommand3.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlSelectCommand3.Connection = Me.SqlConnection3
        Me.SqlSelectCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(10, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlSelectCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Fokus", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(10, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlSelectCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Key", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(10, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        '
        'SqlInsertCommand3
        '
        Me.SqlInsertCommand3.CommandText = "[pv_kostenstelle_insert]"
        Me.SqlInsertCommand3.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlInsertCommand3.Connection = Me.SqlConnection3
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@kostenstellenr", System.Data.SqlDbType.Int, 4, "kostenstellenr"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bezeichnung", System.Data.SqlDbType.VarChar, 255, "bezeichnung"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@beschreibung", System.Data.SqlDbType.VarChar, 255, "beschreibung"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@kostenstellenummer", System.Data.SqlDbType.Int, 4, "kostenstellenummer"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@dokument_kopfzeile", System.Data.SqlDbType.VarChar, 255, "dokument_kopfzeile"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@marktbereichnr", System.Data.SqlDbType.Int, 4, "marktbereichnr"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@niederlassungnr", System.Data.SqlDbType.Int, 4, "niederlassungnr"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bankinformationnr", System.Data.SqlDbType.Int, 4, "bankinformationnr"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        Me.SqlInsertCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        '
        'SqlUpdateCommand3
        '
        Me.SqlUpdateCommand3.CommandText = "[pv_kostenstelle_update]"
        Me.SqlUpdateCommand3.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlUpdateCommand3.Connection = Me.SqlConnection3
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@kostenstellenr", System.Data.SqlDbType.Int, 4, "kostenstellenr"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bezeichnung", System.Data.SqlDbType.VarChar, 255, "bezeichnung"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@beschreibung", System.Data.SqlDbType.VarChar, 255, "beschreibung"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@kostenstellenummer", System.Data.SqlDbType.Int, 4, "kostenstellenummer"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@dokument_kopfzeile", System.Data.SqlDbType.VarChar, 255, "dokument_kopfzeile"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@marktbereichnr", System.Data.SqlDbType.Int, 4, "marktbereichnr"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@niederlassungnr", System.Data.SqlDbType.Int, 4, "niederlassungnr"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@bankinformationnr", System.Data.SqlDbType.Int, 4, "bankinformationnr"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mandantnr", System.Data.SqlDbType.Int, 4, "mandantnr"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@erstellt_am", System.Data.SqlDbType.DateTime, 8, "erstellt_am"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutiert_am", System.Data.SqlDbType.DateTime, 8, "mutiert_am"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@mutierer", System.Data.SqlDbType.Int, 4, "mutierer"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@aktiv", System.Data.SqlDbType.Bit, 1, "aktiv"))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_kostenstellenr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "kostenstellenr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bankinformationnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bankinformationnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_beschreibung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "beschreibung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bezeichnung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bezeichnung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_dokument_kopfzeile", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "dokument_kopfzeile", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_kostenstellenummer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "kostenstellenummer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_marktbereichnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "marktbereichnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlUpdateCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_niederlassungnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "niederlassungnr", System.Data.DataRowVersion.Original, Nothing))
        '
        'SqlDeleteCommand3
        '
        Me.SqlDeleteCommand3.CommandText = "[pv_kostenstelle_delete]"
        Me.SqlDeleteCommand3.CommandType = System.Data.CommandType.StoredProcedure
        Me.SqlDeleteCommand3.Connection = Me.SqlConnection3
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(0, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_kostenstellenr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "kostenstellenr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_aktiv", System.Data.SqlDbType.Bit, 1, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "aktiv", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bankinformationnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bankinformationnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_beschreibung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "beschreibung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_bezeichnung", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "bezeichnung", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_dokument_kopfzeile", System.Data.SqlDbType.VarChar, 255, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "dokument_kopfzeile", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_erstellt_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "erstellt_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_kostenstellenummer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "kostenstellenummer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mandantnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mandantnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_marktbereichnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "marktbereichnr", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutierer", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutierer", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_mutiert_am", System.Data.SqlDbType.DateTime, 8, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "mutiert_am", System.Data.DataRowVersion.Original, Nothing))
        Me.SqlDeleteCommand3.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Original_niederlassungnr", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "niederlassungnr", System.Data.DataRowVersion.Original, Nothing))
        '
        'frmKostenstelle
        '
        Me.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
        Me.ClientSize = New System.Drawing.Size(600, 509)
        Me.Controls.AddRange(New System.Windows.Forms.Control() {Me.C1TrueDBDropdown1})
        Me.Name = "frmKostenstelle"
        Me.Text = ""
        CType(Me.DataSet1, System.ComponentModel.ISupportInitialize).EndInit()
        CType(Me.DataSet2, System.ComponentModel.ISupportInitialize).EndInit()
        CType(Me.DataSet3, System.ComponentModel.ISupportInitialize).EndInit()
        CType(Me.DataSet4, System.ComponentModel.ISupportInitialize).EndInit()
        CType(Me.C1TrueDBDropdown1, System.ComponentModel.ISupportInitialize).EndInit()
        Me.ResumeLayout(False)

    End Sub

#End Region


#Region "Datahandling"
    Public Sub LoadData()
        Dim dbconn As New EDOKA.DB_Connection()
        Dim t As DataTable

        Me.SqlConnection1.ConnectionString = Globals.sConnectionString
        Me.SqlConnection2.ConnectionString = Globals.sConnectionString
        Me.SqlConnection3.ConnectionString = Globals.sConnectionString
        Me.SqlConnection1.Open()
        ' Nur für den aktuell gewählten Mandanten die Daten auslesen
        Me.SqlDataAdapter1.SelectCommand.Parameters.Clear()
        Me.SqlDataAdapter1.SelectCommand.Parameters.AddWithValue("@mandantnr", Globals.MandantNr)
        Me.SqlDataAdapter1.Fill(Me.DataSet1)
        Me.TBLeft.DataSource = Me.DataSet1
        Me.TBLeft.DataMember = Me.TableNameLeft

        ' Nur für den aktuell gewählten Mandanten die Daten auslesen
        Me.SqlDataAdapter2.SelectCommand.Parameters.Clear()
        Me.SqlDataAdapter2.SelectCommand.Parameters.AddWithValue("@mandantnr", Globals.MandantNr)
        Me.SqlDataAdapter2.Fill(Me.DataSet2)
        Me.TBRight.DataSource = Me.DataSet2
        Me.TBRight.DataMember = Me.TableNameRight
        SpaltenTitel_Aktualisieren(1, Me.TableNameLeft, Me.DataSet1)
        SpaltenTitel_Aktualisieren(2, Me.TableNameRight, Me.DataSet2)
        UpdateGrpText(5014, 5015, 5016)
    End Sub

    Private Sub TBLeft_Click(ByVal sender As System.Object, ByVal e As C1.Win.C1TrueDBGrid.RowColChangeEventArgs) Handles TBLeft.RowColChange
        Me.SuspendLayout()
        check_changes()
        Refresh_TBBottom()
        Me.ResumeLayout(True)
    End Sub

    Private Sub TBRight_Click(ByVal sender As System.Object, ByVal e As C1.Win.C1TrueDBGrid.RowColChangeEventArgs) Handles TBRight.RowColChange
        Me.SuspendLayout()
        check_changes()
        Refresh_TBBottom()
        Me.ResumeLayout(True)
    End Sub

    Public Sub Refresh_TBBottom()
        Me.SqlDataAdapter3.SelectCommand.Parameters.Clear()
        If Me.FokusLeft.Checked Then
            Me.SqlDataAdapter3.SelectCommand.Parameters.AddWithValue("@Fokus", 1)
            Me.SqlDataAdapter3.SelectCommand.Parameters.AddWithValue("@Key", Me.TBLeft.Columns(0).Value)
        Else
            Me.SqlDataAdapter3.SelectCommand.Parameters.AddWithValue("@Fokus", 2)
            Me.SqlDataAdapter3.SelectCommand.Parameters.AddWithValue("@Key", Me.TBRight.Columns(0).Value)
        End If
        Try
            Me.DataSet3.Clear()
            Me.SqlDataAdapter3.Fill(Me.DataSet3)
        Catch ex As Exception
        End Try

        Me.TBBottom.DataSource = Me.DataSet3
        Me.TBBottom.DataMember = Me.TableNameBottom

        SpaltenTitel_Aktualisieren(3, Me.TableNameBottom, Me.DataSet3)
        TBBottom_Format()
        Me.DataSet4.Clear()

        ' Nur für den aktuell gewählten Mandanten die Daten auslesen
        Me.SqlDataAdapter4.SelectCommand.Parameters.Clear()
        Me.SqlDataAdapter4.SelectCommand.Parameters.Add("@mandantnr", Globals.MandantNr)
        Me.SqlDataAdapter4.Fill(Me.DataSet4)
        Me.C1TrueDBDropdown1.DataSource = Me.DataSet4
        Me.C1TrueDBDropdown1.DataMember = "bankinformation"
        Me.C1TrueDBDropdown1.Columns(0).Caption = MyMsg.Get_Meldungstext(7002)
        Me.C1TrueDBDropdown1.Columns(1).Caption = MyMsg.Get_Meldungstext(7003)
        Me.C1TrueDBDropdown1.DisplayColumns(0).Width = 20
        Try
            Me.TBBottom.Columns("bankinformationnr").DropDown = Me.C1TrueDBDropdown1
        Catch
        End Try
    End Sub

    Private Sub TBBottom_Update(ByVal sender As System.Object, ByVal e As C1.Win.C1TrueDBGrid.ColEventArgs) Handles TBBottom.AfterColEdit
        'Aktualisieren von Mutierer und Mutiert_am
        Dim i As Integer
        For i = 0 To Me.TBBottom.Columns.Count - 1
            If Me.TBBottom.Columns(i).DataField = "mutiert_am" Then Me.TBBottom.Columns(i).Value = Now
            If Me.TBBottom.Columns(i).DataField = "mutierer" Then Me.TBBottom.Columns(i).Value = Globals.MitarbeiterNr
        Next
    End Sub

    Private Sub Insert_TBBottom()
        Dim iLeft As Integer
        Dim iRigth As Integer
        Dim ic, i As Integer
        Dim CurrentSel As Boolean
        Dim colRows As C1.Win.C1TrueDBGrid.SelectedRowCollection
        Dim vdata As New edokadb.clsKostenstelle()
        Dim dbkey As New edokadb.clsMyKey_Tabelle()
        Dim key As Long
        CurrentSel = False
        iLeft = Me.TBLeft.SelectedRows.Count
        iRigth = Me.TBRight.SelectedRows.Count
        If (Me.FokusLeft.Checked And iLeft > 1) Or (Me.FokusRight.Checked And iRigth > 1) Then
            Globals.MyMsg.show_standardmessage(4, MsgBoxStyle.Exclamation)
            Exit Sub
        End If
        If Me.FokusLeft.Checked Then
            ic = iRigth
            colRows = Me.TBRight.SelectedRows
        Else
            ic = iLeft
            colRows = Me.TBLeft.SelectedRows
        End If
        If ic = 0 Then
            CurrentSel = True
            ic = ic + 1
        End If

        For i = 0 To ic - 1
            vdata.bAktiv = New SqlBoolean(CType(True, Boolean))
            vdata.daErstellt_am = New SqlDateTime(CType(Now, DateTime))
            vdata.daMutiert_am = New SqlDateTime(CType(Now, DateTime))
            vdata.iMandantnr = New SqlInt32(CType(Globals.MandantNr, Int32))
            vdata.iMutierer = New SqlInt32(CType(Globals.MitarbeiterNr, Int32))
            If Me.FokusLeft.Checked Then
                vdata.iMarktbereichnr = New SqlInt32(CType(Me.TBLeft.Columns(0).Value, Int32))
                If CurrentSel Then
                    vdata.iNiederlassungnr = New SqlInt32(CType(Me.TBRight.Columns(0).Value, Int32))
                Else
                    vdata.iNiederlassungnr = New SqlInt32(CType(Me.TBRight.Columns(0).CellValue(colRows(i)), Int32))
                End If
            Else
                If CurrentSel Then
                    vdata.iMarktbereichnr = New SqlInt32(CType(Me.TBLeft.Columns(0).Value, Int32))
                Else
                    vdata.iMarktbereichnr = New SqlInt32(CType(Me.TBLeft.Columns(0).CellValue(colRows(i)), Int32))
                End If
                vdata.iKostenstellenr = New SqlInt32(CType(Me.TBRight.Columns(0).Value, Int32))
            End If
            vdata.iKostenstellenr = New SqlInt32(CType(0, Int32))
            vdata.iBankinformationnr = New SqlInt32(CType(1, Int32))
            vdata.sBezeichnung = New SqlString(CType("Neue Kostenstelle", String))
            vdata.sBeschreibung = New SqlString(CType("", String))
            dbkey.cpMainConnectionProvider = conn
            key = dbkey.get_dbkey("kostenstelle")
            vdata.iKostenstellenr = New SqlInt32(CType(key, Int32))
            vdata.cpMainConnectionProvider = conn
            conn.OpenConnection()
            vdata.Insert()
            conn.CloseConnection(True)
        Next
        vdata.Dispose()
        Refresh_TBBottom()
    End Sub

    Private Function Save_Data() As Boolean
        Save_Data = True
        Try
            SqlDataAdapter3.Update(Me.DataSet3)
        Catch ex As Exception
            MsgBox(Globals.MyMsg.Get_Meldungstext(902) + ex.Message)
            Save_Data = False
        End Try
    End Function

#End Region

#Region "Toolbar"
    Private Sub ToolBar1_ButtonClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ToolBarButtonClickEventArgs) Handles ToolBar1.ButtonClick
        Select Case ToolBar1.Buttons.IndexOf(e.Button)
            Case 0 'close button
                Me.Close()
            Case 1 'Speichern
                Save_Data()
            Case Else
                Throw New Exception(MyMsg.Get_Meldungstext(901))
        End Select
    End Sub
#End Region


#Region "FormularFunktionen"

    Private Sub frmRolle_SysadminFunktion_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Me.TableNameLeft = "marktbereich"
        Me.TableNameRight = "niederlassung"
        Me.TableNameBottom = "kostenstelle"
        LoadData()
    End Sub

    Private Sub BtnConnect_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnConnect.Click
        Insert_TBBottom()
    End Sub

    Private Sub frmClose(ByVal sender As System.Object, ByVal e As CancelEventArgs) Handles MyBase.Closing
        Dim msg As MsgBoxResult
        If Me.DataSet3.HasChanges Then
            msg = Globals.MyMsg.Show_MessageYesNoCancel(2)
            If msg = MsgBoxResult.No Then
                e.Cancel = False
            End If
            If msg = MsgBoxResult.Yes Then
                If Save_Data() Then e.Cancel = False Else e.Cancel = True
            End If
            If msg = MsgBoxResult.Cancel Then e.Cancel = True
        End If
    End Sub

    Private Sub check_changes()
        Dim msg As MsgBoxResult
        If Me.DataSet3.HasChanges Then
            msg = Globals.MyMsg.Show_MessageYesNoCancel(2)
            If msg = MsgBoxResult.Yes Then
                Save_Data()
            End If
        End If
    End Sub

    Private Sub MenuItem2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MenuItem2.Click
        Me.Close()
    End Sub

    Private Sub MenuItem3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MenuItem3.Click
        save_data()
    End Sub

#End Region

End Class